Card storage: Difference between revisions
Created page with '*'''What is the best way to store cards?''' Cardboard boxes made specifically for card storage are good for storing complete sets. As long as they are not moved around a lot, th…' |
No edit summary |
||
| Line 1: | Line 1: | ||
==Penny Sleeves== | |||
==Top Loaders== | |||
==Hinge/Deck Cases== | |||
Hinge and deck cases, depending on size, will hold 10 to 400 cards with 35, 50 and 100 being the most common sizes. Both hinge and deck cases are made of plastic; hinge cases have a somewhat delicate hinged-lid while deck cases have a rigid, 2-part construction. Hinge cases usually cost 30-50 cents each, while deck cases cost about $1 each. | |||
Beware that 150ct hinge cases, the largest hinge case available, are slightly tapered and cards at the bottom of the case often stick inside. | |||
==Cardboard boxes== | |||
Cardboard boxes made specifically for sports cards are good for storing 100 or more cards. These boxes provide better protection than shoe boxes as they are specifically designed to hold cards. These boxes come in single-row and multi-row varieties. Single-row boxes hold 100, 200, 300, 400, 500, 660 and 800 cards. These boxes usually cost between 50 cents to $1 each. Multi-row boxes hold 1,600 (2-row), 3,000 (3-row) and 3,200 (4-row) cards. Due to their size, the 4-row, 3,200ct boxes are commonly refered to as monster boxes. | |||
==Pages and Binders== | |||
Three-ring binders and nine-pocket pages are good for cards as well, although if you handle them a lot, taking them in and out of the pockets is a bit of a hassle and the dangers of damage escalate. Make sure you use the pages with no chemicals or preservatives like PVC, as sheets made of these materials might leave a stain on your cards. This is also a good way to store sets as well as special collections of cards (such as all your favorite cards of one player). Currently, two companies make sports card pages, Ultra-Pro and BCW. A 100ct box of pages typically costs $10 to $20. | |||
Storing cards in binders, long-term, has been the subject of many debates in the hobby. Some collectors believe that binders should be stored flat to eliminate the possibility of the pages sagging over time and bending the bottom row of cards. Other collectors believe storing binders upright is safe as long as the pages are snug inside the binder. | |||
When placing a large set into a binder, some collectors use page spacer, a plastic shim that is placed before the first page and after the last page, to minimize the chance that the first or last page get caught between the cover and clasps. | |||
The brand of binder is also the subject of discussion among collectors. Some are fine using less-expensive binders found at large retail stores, while others prefer specialty binders that feature dust protection, slip covers and added protection. Popular higher-end binders include: MJ Roop and Univerture/Unikeep. | |||
==Top Loaders== | |||
Top loaders are the most popular method of storing single cards. They are a slim piece of plastic that just narrow enough to fit a single card. Due to the recent popularity of cards thicker than average, | |||
Hard plastic holders, or "Top-Loaders," are probably the most common and the most traditional. They don't look too aesthetic, but they serve their purpose. Soft sleeves are definitely necessary so that the hard plastic doesn't scratch the cards. These are good for cards that you will handle a lot. | |||
Semi-rigid plastic holders are pretty big and very light. These are very good for cutting down on postage when shipping $3 - $5 cards. The trick is getting the card out and in. The best way to get the card in and out is to squeeze the sides of the holder so that the top opens (like a mouth). Then, press the card up against the smaller side and slide the card out. Soft sleeves are definitely a good idea when using these kinds of holders. Using these to store cards can be bulky. | Semi-rigid plastic holders are pretty big and very light. These are very good for cutting down on postage when shipping $3 - $5 cards. The trick is getting the card out and in. The best way to get the card in and out is to squeeze the sides of the holder so that the top opens (like a mouth). Then, press the card up against the smaller side and slide the card out. Soft sleeves are definitely a good idea when using these kinds of holders. Using these to store cards can be bulky. | ||
Semi-rigid plastic holders are pretty big and very light. These are very good for cutting down on postage when shipping $3 - $5 cards. The trick is getting the card out and in. The best way to get the card in and out is to squeeze the sides of the holder so that the top opens (like a mouth). Then, press the card up against the smaller side and slide the card out. Soft sleeves are definitely a good idea when using these kinds of holders. Using these to store cards can be bulky. | |||
Snap-its are holders that are very hard plastic and "snap" shut. The open by using your fingernails/coin/screwdriver to pry it open. Snap-its usually have a recess in it (a rectangular indention for card). Although these are very attractive, they should be used only when the card is not moved around. The recess is usually larger than card. Therefore the card moves around inside and is susceptible to edge wear and corner dings | Snap-its are holders that are very hard plastic and "snap" shut. The open by using your fingernails/coin/screwdriver to pry it open. Snap-its usually have a recess in it (a rectangular indention for card). Although these are very attractive, they should be used only when the card is not moved around. The recess is usually larger than card. Therefore the card moves around inside and is susceptible to edge wear and corner dings | ||
Revision as of 14:28, 29 October 2012
Penny Sleeves
Top Loaders
Hinge/Deck Cases
Hinge and deck cases, depending on size, will hold 10 to 400 cards with 35, 50 and 100 being the most common sizes. Both hinge and deck cases are made of plastic; hinge cases have a somewhat delicate hinged-lid while deck cases have a rigid, 2-part construction. Hinge cases usually cost 30-50 cents each, while deck cases cost about $1 each.
Beware that 150ct hinge cases, the largest hinge case available, are slightly tapered and cards at the bottom of the case often stick inside.
Cardboard boxes
Cardboard boxes made specifically for sports cards are good for storing 100 or more cards. These boxes provide better protection than shoe boxes as they are specifically designed to hold cards. These boxes come in single-row and multi-row varieties. Single-row boxes hold 100, 200, 300, 400, 500, 660 and 800 cards. These boxes usually cost between 50 cents to $1 each. Multi-row boxes hold 1,600 (2-row), 3,000 (3-row) and 3,200 (4-row) cards. Due to their size, the 4-row, 3,200ct boxes are commonly refered to as monster boxes.
Pages and Binders
Three-ring binders and nine-pocket pages are good for cards as well, although if you handle them a lot, taking them in and out of the pockets is a bit of a hassle and the dangers of damage escalate. Make sure you use the pages with no chemicals or preservatives like PVC, as sheets made of these materials might leave a stain on your cards. This is also a good way to store sets as well as special collections of cards (such as all your favorite cards of one player). Currently, two companies make sports card pages, Ultra-Pro and BCW. A 100ct box of pages typically costs $10 to $20.
Storing cards in binders, long-term, has been the subject of many debates in the hobby. Some collectors believe that binders should be stored flat to eliminate the possibility of the pages sagging over time and bending the bottom row of cards. Other collectors believe storing binders upright is safe as long as the pages are snug inside the binder.
When placing a large set into a binder, some collectors use page spacer, a plastic shim that is placed before the first page and after the last page, to minimize the chance that the first or last page get caught between the cover and clasps.
The brand of binder is also the subject of discussion among collectors. Some are fine using less-expensive binders found at large retail stores, while others prefer specialty binders that feature dust protection, slip covers and added protection. Popular higher-end binders include: MJ Roop and Univerture/Unikeep.
Top Loaders
Top loaders are the most popular method of storing single cards. They are a slim piece of plastic that just narrow enough to fit a single card. Due to the recent popularity of cards thicker than average,
Hard plastic holders, or "Top-Loaders," are probably the most common and the most traditional. They don't look too aesthetic, but they serve their purpose. Soft sleeves are definitely necessary so that the hard plastic doesn't scratch the cards. These are good for cards that you will handle a lot.
Semi-rigid plastic holders are pretty big and very light. These are very good for cutting down on postage when shipping $3 - $5 cards. The trick is getting the card out and in. The best way to get the card in and out is to squeeze the sides of the holder so that the top opens (like a mouth). Then, press the card up against the smaller side and slide the card out. Soft sleeves are definitely a good idea when using these kinds of holders. Using these to store cards can be bulky.
Semi-rigid plastic holders are pretty big and very light. These are very good for cutting down on postage when shipping $3 - $5 cards. The trick is getting the card out and in. The best way to get the card in and out is to squeeze the sides of the holder so that the top opens (like a mouth). Then, press the card up against the smaller side and slide the card out. Soft sleeves are definitely a good idea when using these kinds of holders. Using these to store cards can be bulky.
Snap-its are holders that are very hard plastic and "snap" shut. The open by using your fingernails/coin/screwdriver to pry it open. Snap-its usually have a recess in it (a rectangular indention for card). Although these are very attractive, they should be used only when the card is not moved around. The recess is usually larger than card. Therefore the card moves around inside and is susceptible to edge wear and corner dings
There are many types of screw-downs, but they all protect the same, regardless of size. The only major difference is that some have recesses and some do not. The recesses in screw-downs usually are not as big and deep as the recesses in snap-its. They still have the same problem though. The card can move inside. The screw-downs without the recess are probably the best protector as long as the screws are not to tight. However, if the card has a high gloss finish or UV coating, some of the gloss may rub off on the holder and ruin the card.
Soft-sleeves, or "penny-sleeves," are individual soft plastic sleeves about the size of a card (with about 1/16 inch on each side leeway). Usually, these aren't good for protecting on their own, but they do keep any of the other holders (with hard surfaces) from scratching the card. These are best used with top-loaders (both the semi-rigid type and the hard plastic type). Some people use soft sleeves with screw downs as well, although they don't work to well with the recessed type. Some people also use soft sleeves when storing cards in a cardboard box. It really can't hurt. I usually use these for the star cards.