Card storage - Revision history

Chris at 14:57, 29 October 2012

2012-10-29T14:57:51Z

← Older revision		Revision as of 10:57, 29 October 2012
Line 3:		Line 3:
	==Soft Sleeves==		==Soft Sleeves==

	Soft-sleeves, or "penny-sleeves," are individual soft plastic sleeves about the size of a card (with about 1/16 inch on each side leeway). Usually, these aren't ~~good~~ for protecting on their own, but they do keep any of the other holders (with hard surfaces) from scratching the card. These are best used with top-loaders ~~(both the~~ semi-rigid ~~type and the hard plastic type)~~. Some people use soft sleeves with screw downs as well, although they don't work to well with the recessed type. Some people also use soft sleeves when storing cards in a cardboard box. ~~It really can't hurt. I~~ usually ~~use these~~ for ~~the star cards~~.		Soft-sleeves, or "penny-sleeves", are individual soft plastic sleeves about the size of a card (with about 1/16 inch on each side leeway). Usually, these aren't used for protecting valuable cards on their own, but they do keep any of the other holders (with hard surfaces) from scratching the card. These are best used with top-loaders and semi-rigid holders. Some people use soft sleeves with screw downs as well, although they don't work to well with the recessed type. Some people also use soft sleeves for the star cards when storing cards in a cardboard box. Soft sleeves usually cost a penny per sleeve, or $1 for a package of 100.

	==Top Loaders==		==Top Loaders==

	Top loaders are the most popular method of storing single cards. They are a slim piece of plastic ~~that~~ just narrow enough to fit a single card. They come in a variety of sizes to accommodate the different widths, lengths and thickness of cards. Soft sleeves are often used together with top loaders to minimize the hard plastic scratching the card. Top-loaders usually cost $2 for a package of 25.		Top loaders are the most popular method of storing single cards. They are a slim piece of plastic with a slit just narrow enough to fit a single card. They come in a variety of sizes to accommodate the different widths, lengths and thickness of cards. Soft sleeves are often used together with top loaders to minimize the hard plastic scratching the card. Top-loaders usually cost $1 to $2 for a package of 25.

	==Semi-rigid Holders==		==Semi-rigid Holders==

	Semi-rigid plastic holders are thin and very light, however they provide less protection than a top-loader as they are less rigid. These are very good for cutting down costs, especially when shipping cards. Many grading companies require semi-rigid holders for card submissions. ~~Semi-rigid holders, which~~ come in several different sizes, usually cost $10-$20 for a package of 200.		Semi-rigid plastic holders are thin and very light, however they provide less protection than a top-loader as they are less rigid. These are very good for cutting down costs, especially when shipping cards. Many grading companies require semi-rigid holders for card submissions. These come in several different sizes and usually cost $10-$20 for a package of 200.

	==Snap Holders==		==Snap Holders==
Line 23:		Line 23:
	==Magnetic Holders==		==Magnetic Holders==

	Due to the difficulty of screw-down and snap holders, magnetic holders came about in the mid-2000s. Magnetic holders, which ~~only~~ hold a single card, come in various sizes. Like screw-down and snap holders, these consist of two pieces of plastic secured together by a small magnet. These holders usually cost $1-$2 each.		Due to the difficulty of screw-down and snap holders, magnetic holders came about in the mid-2000s. Magnetic holders, which hold a single card, come in various sizes. Like screw-down and snap holders, these consist of two pieces of plastic secured together by a small magnet. These holders usually cost $1-$2 each.

	=Multiple Card Storage=		=Multiple Card Storage=
Line 29:		Line 29:
	==Hinge/Deck Cases==		==Hinge/Deck Cases==

	Hinge and deck cases, depending on size, will hold 10 to 400 cards with 35, 50 and 100 being the most common sizes. Both hinge and deck cases are made of plastic; hinge cases have a somewhat delicate hinged-lid while deck cases have a rigid, 2-part construction. Hinge cases usually cost 30-50 cents each, while deck cases cost ~~about~~ $1 each.		Hinge and deck cases, depending on size, will hold 10 to 400 cards with 35, 50 and 100 being the most common sizes. Both hinge and deck cases are made of plastic; hinge cases have a somewhat delicate hinged-lid while deck cases have a rigid, 2-part construction. Hinge cases usually cost 30-50 cents each, while deck cases, depending on size cost $1 to $3 each. Beware that 150ct hinge cases, the largest hinge case available, are slightly tapered and cards at the bottom of the case often stick inside.

	Beware that 150ct hinge cases, the largest hinge case available, are slightly tapered and cards at the bottom of the case often stick inside.

	==Cardboard boxes==		==Cardboard boxes==

Chris at 14:51, 29 October 2012

2012-10-29T14:51:01Z

@@ Line 1: / Line 1: @@
-==Penny Sleeves==
+=Single Card Storage=
 ==Soft Sleeves==
 Soft-sleeves, or "penny-sleeves," are individual soft plastic sleeves about the size of a card (with about 1/16 inch on each side leeway). Usually, these aren't good for protecting on their own, but they do keep any of the other holders (with hard surfaces) from scratching the card. These are best used with top-loaders (both the semi-rigid type and the hard plastic type). Some people use soft sleeves with screw downs as well, although they don't work to well with the recessed type. Some people also use soft sleeves when storing cards in a cardboard box. It really can't hurt. I usually use these for the star cards.
 ==Top Loaders==
@@ Line 50: / Line 24: @@
 Due to the difficulty of screw-down and snap holders, magnetic holders came about in the mid-2000s. Magnetic holders, which only hold a single card, come in various sizes. Like screw-down and snap holders, these consist of two pieces of plastic secured together by a small magnet. These holders usually cost $1-$2 each.

Chris at 14:49, 29 October 2012

2012-10-29T14:49:45Z

← Older revision		Revision as of 10:49, 29 October 2012
Line 24:		Line 24:


	==~~Top Loaders~~==		==Soft Sleeves==

	Top loaders are the most popular method of storing single cards. They are a slim piece of plastic that just narrow enough to fit a single card. Due to the recent popularity of cards thicker than average,

			Soft-sleeves, or "penny-sleeves," are individual soft plastic sleeves about the size of a card (with about 1/16 inch on each side leeway). Usually, these aren't good for protecting on their own, but they do keep any of the other holders (with hard surfaces) from scratching the card. These are best used with top-loaders (both the semi-rigid type and the hard plastic type). Some people use soft sleeves with screw downs as well, although they don't work to well with the recessed type. Some people also use soft sleeves when storing cards in a cardboard box. It really can't hurt. I usually use these for the star cards.



	Hard plastic holders, or "Top-Loaders," are probably the most common and the most traditional. They don't look too aesthetic, but they serve their purpose. Soft sleeves are definitely necessary so that the hard plastic doesn't scratch the cards. These are good for cards that you will handle a lot.

			==Top Loaders==

			Top loaders are the most popular method of storing single cards. They are a slim piece of plastic that just narrow enough to fit a single card. They come in a variety of sizes to accommodate the different widths, lengths and thickness of cards. Soft sleeves are often used together with top loaders to minimize the hard plastic scratching the card. Top-loaders usually cost $2 for a package of 25.

			==Semi-rigid Holders==

			Semi-rigid plastic holders are thin and very light, however they provide less protection than a top-loader as they are less rigid. These are very good for cutting down costs, especially when shipping cards. Many grading companies require semi-rigid holders for card submissions. Semi-rigid holders, which come in several different sizes, usually cost $10-$20 for a package of 200.

	Semi-rigid plastic holders are pretty big and very light. These are very good for cutting down on postage when shipping $3 - $5 cards. The trick is getting the card out and in. The best way to get the card in and out is to squeeze the sides of the holder so that the top opens (like a mouth). Then, press the card up against the smaller side and slide the card out. Soft sleeves are definitely a good idea when using these kinds of holders. Using these to store cards can be bulky.		==Snap Holders==

			Snap holders, which "snap" open and closed, are made of plastic and hold a single card. These open by using your fingernail/coin/screwdriver to pry it open by turning a recessed slot on the side. These holders, which can be found for about 50 cents each, are becoming less popular due to the difficulty of opening and closing.

			==Screw-down Holders==

	~~Semi~~-~~rigid plastic~~ holders ~~are pretty big and very light~~. These ~~are very good for cutting down on postage when shipping $3~~ - ~~$5 cards. The trick~~ is ~~getting the card out and in. The best way to get the card in and out is to squeeze the sides of the holder so that the top opens (like~~ a ~~mouth)~~. ~~Then~~, ~~press the card up against the smaller side and slide the card out. Soft sleeves~~ are ~~definitely~~ a ~~good idea when using these kinds of holders. Using these~~ to ~~store cards can be bulky~~.		There are many types of screw-down holders, but they all protect the same, regardless of size. These have a rigid, two-piece plastic construction that is secured with a screw. Like snap holders, these are becoming antiquated as a screwdriver is needed to open and close the holder.

			==Magnetic Holders==

			Due to the difficulty of screw-down and snap holders, magnetic holders came about in the mid-2000s. Magnetic holders, which only hold a single card, come in various sizes. Like screw-down and snap holders, these consist of two pieces of plastic secured together by a small magnet. These holders usually cost $1-$2 each.
	~~Snap-its are holders that are very hard plastic and "snap" shut. The open by using your fingernails/coin/screwdriver~~ to pry it open. Snap-its usually have a recess in it (a rectangular indention for card). Although these are very attractive, they should be used only when the card is not moved around. The recess is usually larger than card. Therefore the ~~card moves around inside and is susceptible to edge wear and corner dings~~

	~~There are many types~~ of screw-~~downs~~, ~~but they all protect the same, regardless of size. The only major difference is that some have recesses and some do not. The recesses~~ in ~~screw-downs usually are not as big and deep as~~ the ~~recesses in snap~~-~~its~~. ~~They still have the same problem though. The~~ card ~~can move inside~~. ~~The~~ screw-~~downs without the recess are probably the best protector as long as the screws are not to tight. However, if the card has a high gloss finish or UV coating, some of the gloss may rub off on the holder~~ and ~~ruin the card.~~

	~~Soft-sleeves~~, ~~or "penny-sleeves," are individual soft plastic sleeves about the size~~ of ~~a card (with about 1/16 inch on each side leeway). Usually, these aren't good for protecting on their own, but they do keep any~~ of ~~the other holders (with hard surfaces) from scratching the card. These are best used with top-loaders (both the semi-rigid type and the hard~~ plastic ~~type). Some people use soft sleeves with screw downs as well, although they don't work to well with the recessed type. Some people also use soft sleeves when storing cards in~~ a ~~cardboard box~~. ~~It really can't hurt. I~~ usually ~~use these for the star cards~~.

Chris at 14:28, 29 October 2012

2012-10-29T14:28:23Z

@@ Line 1: / Line 1: @@
-*'''What is the best way to store cards?'''
+==Penny Sleeves==
 Semi-rigid plastic holders are pretty big and very light. These are very good for cutting down on postage when shipping $3 - $5 cards. The trick is getting the card out and in. The best way to get the card in and out is to squeeze the sides of the holder so that the top opens (like a mouth). Then, press the card up against the smaller side and slide the card out. Soft sleeves are definitely a good idea when using these kinds of holders. Using these to store cards can be bulky.
-Hard plastic holders, or "Top-Loaders," are probably the most common and the most traditional. They don't look too aesthetic, but they serve their purpose. Soft sleeves are definitely necessary so that the hard plastic doesn't scratch the cards. These are good for cards that you will handle a lot.
 Snap-its are holders that are very hard plastic and "snap" shut. The open by using your fingernails/coin/screwdriver to pry it open. Snap-its usually have a recess in it (a rectangular indention for card). Although these are very attractive, they should be used only when the card is not moved around. The recess is usually larger than card. Therefore the card moves around inside and is susceptible to edge wear and corner dings

Chris: Created page with '*'''What is the best way to store cards?''' Cardboard boxes made specifically for card storage are good for storing complete sets. As long as they are not moved around a lot, th…'

2012-04-28T02:07:58Z

Created page with '*'''What is the best way to store cards?''' Cardboard boxes made specifically for card storage are good for storing complete sets. As long as they are not moved around a lot, th…'

New page

*'''What is the best way to store cards?'''

Cardboard boxes made specifically for card storage are good for storing complete sets. As long as they are not moved around a lot, they won't get damaged. Cardboard boxes are also good if you like to handle your cards a lot. They are available at sport card stores or card shows.

D-ringed binders and nine-pocket pages are good for sets as well, although if you handle them a lot, taking them in and out of the pockets is a bit of a hassle and the dangers of damage escalate. Make sure you use the pages with no chemicals or preservatives like PVC, as sheets made of these materials might leave a stain on your cards. This is also a good way to store high-end sets as well as special collections of cards (such as all your favorite cards of one player).

Semi-rigid plastic holders are pretty big and very light. These are very good for cutting down on postage when shipping $3 - $5 cards. The trick is getting the card out and in. The best way to get the card in and out is to squeeze the sides of the holder so that the top opens (like a mouth). Then, press the card up against the smaller side and slide the card out. Soft sleeves are definitely a good idea when using these kinds of holders. Using these to store cards can be bulky.

Hard plastic holders, or "Top-Loaders," are probably the most common and the most traditional. They don't look too aesthetic, but they serve their purpose. Soft sleeves are definitely necessary so that the hard plastic doesn't scratch the cards. These are good for cards that you will handle a lot.

Snap-its are holders that are very hard plastic and "snap" shut. The open by using your fingernails/coin/screwdriver to pry it open. Snap-its usually have a recess in it (a rectangular indention for card). Although these are very attractive, they should be used only when the card is not moved around. The recess is usually larger than card. Therefore the card moves around inside and is susceptible to edge wear and corner dings

There are many types of screw-downs, but they all protect the same, regardless of size. The only major difference is that some have recesses and some do not. The recesses in screw-downs usually are not as big and deep as the recesses in snap-its. They still have the same problem though. The card can move inside. The screw-downs without the recess are probably the best protector as long as the screws are not to tight. However, if the card has a high gloss finish or UV coating, some of the gloss may rub off on the holder and ruin the card.

Soft-sleeves, or "penny-sleeves," are individual soft plastic sleeves about the size of a card (with about 1/16 inch on each side leeway). Usually, these aren't good for protecting on their own, but they do keep any of the other holders (with hard surfaces) from scratching the card. These are best used with top-loaders (both the semi-rigid type and the hard plastic type). Some people use soft sleeves with screw downs as well, although they don't work to well with the recessed type. Some people also use soft sleeves when storing cards in a cardboard box. It really can't hurt. I usually use these for the star cards.